Work Crew SY75C Excavator OMM
4-4 Operation and Maintenance Manual — 0220 SANY
WORK CREW
Operator
Operator responsibilities include but are not limited to:
• Reject the work site if they have doubts regarding safety.
• Become familiar with the work area and surroundings before beginning work.
• Read and completely understand the instructions in this manual prior to operation.
• Know and obey the operating procedures, relevant laws and regulations.
• Know and follow the requirements for safe operation.
• Know and use the required safety precautions and protective devices.
• Know basic information about the systems of this machine.
• Know and use the correct hand signals between the machine operator and a signal person.
• Stop machine operations in case any defects endangering safety are found.
• The operator must control the machine to protect the personnel or other facilities in the vicinity of the
machine.
• Ensure that all control devices are set to neutral or idle position before supplying power to the drive
components.
• Ensure that the control devices are set to neutral or idle position and the power supply is shut off before
leaving the operator cab.
• The operator must give warning signals when necessary.
• The operator must be use personal protective equipment.
• Always wear the seat belt when operating the machine.
To Next Page
Loading...
