SANY SY75 - Travel Operations

SY75C Excavator OMM Travel Operations.
SANY Operation and Maintenance Manual — 0220 4-17
TABLE OF
CONTENTS
INTRODUCTIONSAFETY
MACHINE
CONTROLS
MACHINE
OPERATION
MAINTENANCESPECIFICATIONS
OPTIONAL
EQUIPMENT
TRAVEL OPERATIONS.
Before Travel
1. Turn throttle control dial (a) clockwise to increase the
engine speed.
2. Place hydraulic lockout control lever (b) in the
UNLOCKED position.
3. Ensure good visibility.
WARNING!
Never allow any personnel to be within 26 ft. (8 m) of the machine while it is moving.
Be aware of all crush points on the machine and ensure that all personnel keep clear of these
areas.
Avoid moving any control lever or pedal to abruptly change the direction of the machine.
Avoid stopping the machine suddenly by releasing the lever or pedal while traveling at high
speed.
Failure to observe and follow these warnings could result in death or injury.
Fig. 4-11
a
Fig. 4-12
b
UNLOCKED
LOCKED