SANY SY75 - Work Area; General Job Safety

SY75C Excavator OMM Work Area
SANY Operation and Maintenance Manual — 0220 4-3
TABLE OF
CONTENTS
INTRODUCTIONSAFETY
MACHINE
CONTROLS
MACHINE
OPERATION
MAINTENANCESPECIFICATIONS
OPTIONAL
EQUIPMENT
WORK AREA
The “work area” is where the actual job function is being performed. Included within the work area are “hazard
areas”, that is, areas immediately surrounding the machine where personnel may be at risk due to machine
operation or movement.
Those within the work area must wear personal protective equipment.
The safety of all personnel within the hazard area is the responsibility of the machine operator.
General Job Safety
NOTE: See “Job Safety” on page 2-6.
WARNING!
Do not move the machine onto a surface or area that has not been approved for the machine.
The machine is heavy and could possibly break through surfaces that are not strong enough
to support the machine. Failure to observe and follow this warning could result in death or
injury.