SANY SY75 - Page 35

SY75C Excavator OMM Machine Decals
SANY Operation and Maintenance Manual — 0220 2-15
TABLE OF
CONTENTS
INTRODUCTIONSAFETY
MACHINE
CONTROLS
MACHINE
OPERATION
MAINTENANCESPECIFICATIONS
OPTIONAL
EQUIPMENT
13. One-way two -way valve
• Located near the valve.
• Warns to read the manual before attempting to
change the position of the valve.
14. Pattern Change
• Located next to the SAE/BHL Selector located
behind the left rear access panel.
• Gives guidance on how to switch the machine from
SAE to BHL mode. Warns about stopping the
engine before switching modes.
15. Pattern change instruction
• Located inside the cab on the window to the right of
the operator.
• Explains how the controls will react in SAE or BHL
mode.
• Be sure to know what mode the machine is in
before operating to prevent unintended movement.
CAUTION
Fig. 2-17
Fig. 2-18
Fig. 2-19