Sanyo PLC-HP7000L User Manual

Computer Input
Image adjust Menu
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Image
adjust and then press the Point ► or the SELECT
button.
1
2
Use the Point ▲▼ buttons to select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point ◄► buttons to
adjust the setting value.
Note:
WhenWhitebalanceRed,Greenor
Blueisadjusted,Color temp.will
changetoAdj..
Press the Point ◄ button to decrease the contrast; press
the Point ► button to increase the contrast (from 0 to 63).
Press the Point ◄ button to decrease the brightness;
press the Point ► button to increase the brightness (from
0 to 63).
Use the Point ◄► buttons
to adjust the setting value.
Selected Image mode
Image Adjustment
Contrast
Brightness
40
The Color Management function can be used to adjust
the LEVEL, PHASE, and GAMMA of the selected display
colors (except for black, white, and gray) on the screen
and replace these colors with other colors if required.
You can store up to eight (8) color management data.
Color management
Select and highlight Color Management by using the
Point ▲▼ buttons and press the SELECT button.
The projected image freezes, and the COLOR
MANAGEMENT POINTER appears.
1
2
3
Use the Point ▲▼◄► buttons to move the pointer to
the spot where you want to adjust the color and then
press the SELECT button. The COLOR SELECTION
window appears, and the color in the center of the
pointer is selected and you can adjust the color.
Use the Point ▲▼◄► buttons to adjust the LEVEL
and PHASE of the color, and then press the SELECT
button to confirm the setting. Then use the Point
▲▼ buttons to adjust the GAMMA for the color and
press the SELECT button to accept the setting. After
adjusting, press the SELECT button to go to the
COLOR MANAGEMENT LIST.
COLOR SELECTION MODE
Go to the COLOR MANAGEMENT LIST.
LIST
Return to the COLOR MANAGEMENT POINTER.
(If you press the MENU button on the side control
or the remote control , it returns to the COLOR
MANAGEMENT POINTER and you will need to
reselect and readjust the color.)
COLOR M.
COLOR
MANAGEMENT
POINTER
POINTER MODE

Sanyo PLC-HP7000L Specifications

General

Brand	Sanyo
Model	PLC-HP7000L
Category	Projector
Language	English