Sanyo PLC-HP7000L User Manual

Video Input
1
2
Press the Point ◄ button to decrease the contrast; press
the Point ► button to increase the contrast (from 0 to
63).
Press the Point ◄ button to decrease the brightness;
press the Point ► button to increase the brightness
(from 0 to 63).
Press the Point ◄ button to lighten red tone; press the
Point ► button to deepen red tone (from 0 to 63).
Press the Point ◄ button to lighten green tone; press
the Point ► button to deepen green tone (from 0 to 63).
Press the Point ◄ button to lighten blue tone; press
the Point ► button to deepen blue tone (from 0 to 63).
Use the Point ◄► buttons to select the desired Color
temp. level (High, Mid, Low or XLow).
Press the Point ◄ button to decrease the intensity of the
color; press the Point ► button to increase the intensity
of the color (from 0 to 63).
Press the Point ◄► buttons to adjust the tint value to
get a proper color balance (from 0 to 63).
Note:
•WhenWhitebalanceRed,GreenorBlueisadjusted,theColortemp.levelwillchangetoAdj..
•Tint cannotbeselectedwhenthevideosystemisPAL,SECAM,PAL-M orPAL-N (p.46).
Image adjust Menu
Selected Image mode
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Image
adjust and then press the Point ► or the SELECT
button.
Use the Point ▲▼ buttons to select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point ◄► buttons to
adjust the setting value.
Use the Point
◄► buttons to
adjust the setting value.
Image Adjustment
Contrast
Brightness
Color
Tint
Color temp.
White balance (Green)
White balance (Red)
White balance (Blue)
48
Color management
Refer to pages 40 and 41.

Sanyo PLC-HP7000L Specifications

General

Brightness	7000 ANSI Lumens
Contrast Ratio	2000:1
Lamp Life	2000 hours (Normal Mode), 3000 hours (Eco Mode)
Lamp Type	UHP
Projection Size	30 - 300 inches
Resolution	1024 x 768 (XGA)
Projection Method	Front, Rear, Ceiling
Input Connectors	HDMI, VGA, Composite Video