Sanyo PLC-HP7000L - Setting

Setting
Setting Menu
Press the MENU button to display the On-Screen
Menu. Press the Point ▲▼ buttons to select
Setting and press the Point ► or the SELECT
button to access the submenu items.
1
2
Use the Point ▲▼ buttons to select the desired
item and then press the Point ► or the SELECT
button to access the selected item.
This projector has a Setting menu that allows you to
set up the other various functions described below.
3
Use the Point ▲▼ buttons to select the desired
item and then press the SELECT button.
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Russian, Chinese, Korean and Japanese.
Language
Position
This function is used to adjust the On-Screen Menu display
position. Press the SELECT button and the adjustment
screen appears (arrows appear). Use the Point ▲▼◄►
buttons to adjust the position. After making the adjustment,
press the SELECT button to return to the Menu screen.
This function detects the input signal automatically. When
a signal is found, the search will stop. Use the Point ▲▼
buttons to select one of the following options.
Mode 1...... Input search will not work.
Mode 2...... Input search works under the following
situation:
– When pressing the INPUT button on the
side control or the remote control.
Mode 3...... Input search works under the following
situation:
– When turning on the projector by pressing
the ON/STAND-BY button on the side
control or pressing the ON button on the
remote control.
– When pressing the INPUT button on the
remote control or on the side control.
– When no signal is detected.
Setting
Language
Menu
Input button
Menu size
This function is used to change the display size of the On-Screen
Menu. Select Menu size and press the SELECT button.
Normal… Display the On-Screen Menu on the screen
in its normal size.
Double … Display the On-Screen Menu on the screen
in its double normal size. The on-screen
menu is temporarily cleared while Color
Management adjustment is in progress.
Position
Note:
•WhileInput buttonissettoMode
3,andnosignalisdetected,ifthe
ShutterorFreezefunctionisactive,
cancelittoactivatetheInputsearch.
•Onlythelastselectedinputsourcecan
bedetected.
•IftheINPUT,INPUT1,INPUT2,
INPUT3,ON/STAND-BYorMENU
buttonispressedduringInputsearch
isinprogress,Inputsearchwillstop
andgobacktothepreviousinput
signal.
53
Note:
 •When the 4:3 function is selected in
Screenaspect,Doubleisnotavailable;
it will be forced to return to Normal in
Menusize.