Sanyo PLC-XT25 User Manual

PCB_MZ7A A11
Printed Wiring Board Diagrams
This projector is isolated from AC line by using the internal converter transformer.
Please pay attention to the following notes in servicing
1. Do not touch the part on hot side (primary circuit) or both parts on hot and cold
sides (secondary circuit) at the same time.
2. Do not shorten the circuit between hot and cold sides.
3. The grounding lead must be connected to the ground of the same circuit when
measuring of voltages and waveforms.
! CAUTION
L1
1AA4B10C5570B
PARTS_SIDE
120
2
1
119
120
2
1
119
C3022
C3032 C3042
L3031
C3021
C3031
C3033
C3034
C3041
C3043
R3021
D3031
R3031
R3032
C3051
D3041
A30C5
IC3031
IC3041
K30A
K30B
Q3031
NETWORK JOINT (SIDE:A) NETWORK JOINT (SIDE:B)
L4
L1
1AA4B10C5570C
PARTS_SIDE
A2821
D2821
D2822
3
1
C2821
R2821
R2822
C2822
C2823
A30C5
K28A
R/C FRONT (SIDE:A)
L4
R/C FRONT (SIDE:B)
MAIN
“K8G”
MAIN “K8S”
AV “K40E”

Sanyo PLC-XT25 Specifications

General

Projection technology	LCD
Contrast ratio (typical)	1000:1
Projector native resolution	XGA (1024x768)
Resolution	1024 x 768 pixels
Dimensions (WxDxH)	302 x 422 x 162 mm
Display diagonal	1 \
Lamp type	UHP
Lamp power	300 W
Light source type	Lamp
Market positioning	Portable

Weight and Dimensions

Weight	9200 g