Sanyo PLC-XT25 User Manual

-43-
Optical Parts Disassembly
29
Blue Pre-polarized glass removal.
1. Remove the Blue Pre-plarized glass upward.
30-1
Optical base top removal-1.
1. Remove 2 screws-A(T3X10) and remove the Stopper lens.
Fig.29
Pre-polarized glass
Fig.30-1
Stopper lens
A
A
Film attached side
comes behind

Sanyo PLC-XT25 Specifications

General

Projection technology	LCD
Contrast ratio (typical)	1000:1
Projector native resolution	XGA (1024x768)
Resolution	1024 x 768 pixels
Dimensions (WxDxH)	302 x 422 x 162 mm
Display diagonal	1 \
Lamp type	UHP
Lamp power	300 W
Light source type	Lamp
Market positioning	Portable

Weight and Dimensions

Weight	9200 g