Sanyo PLC-XT25 User Manual

-74-
Electrical Adjustment
Group/
Item
Item Name Function Initial Range Note
1 Vertical Scaler V-Scaler Edit 100 0 - 200
2 Connect Link/Unlink Edit Selection 0 0 - 1 0: Unlinked Edit, 1: Linked Edit
3 Position Horizontal H-Position Compensation 100 0 - 200
4 Position Vertical V-Position Compensation 100 0 - 200
5 Aspect Enable Aspect Adjustment Enable 0 0 - 1 0: Enable, 1: Disable
Group 280 AutoPC Adjsut
0 AutoPCAdjustEnable
Auto-PC Adj Operation Enable if Un-support-
ed Signal Input
0 0 - 1 0: Enable, 1: Disable
1 Frequency Step Frequency Steps of TotalDot 1 0-3
2 Frequency Threshold Total Dot Freqency Threshold 5 0 - 10 0 [] <--- -----> 10[Not matched]
3 Fine Phase Do Phase Adj after Total Dot Adj. 1 0 - 1 0: Executes Fine Phase, 1: Not Execute
4 BLKDET Black Level Detection Area 1 0 - 3
5 PHASEMSK Phase Detection Filter 0 0 - 3
0: Effective All Bit,
1: Disable Lower 1 bit
2: Disable Lower 2 bit, 3: Disable Lower 3 bit
Group 290 PanelType * Panel Type Check
0 GammaL/R-View Current Setting Check 0 0-20
0: Gamma for L-Turn
20: Gamma for R-Turn * Read only
1 GammaL/R-Change Setting of Gamma 10 0-20
Sets L-Turn Gamma if the Value is set to 0.
Sets R-Turn Gamma if the Value is set to 20.
Group 500 Composite (NTSC) Composite / S-Video
0
1 Disp Dots 668 0 ~ 4095
2 H Back Porch 32 0 ~ 4095
3 V Back Porch 22 0 ~ 4095
4 Disp Line 450 0 ~ 4095
Group 501 Composite (PAL) Composite / S-Video
0
1 Disp Dots 664 0 ~ 4095
2 H Back Porch 32 0 ~ 4095
3 V Back Porch 20 0 ~ 4095
4 Disp Line 534 0 ~ 4095
Group 502 Composite (SECAM) Composite / S-Video
0
1 Disp Dots 652 0 ~ 4095
2 H Back Porch 28 0 ~ 4095
3 V Back Porch 10 0 ~ 4095
4 Disp Line 550 0 ~ 4095
Group 510 SCART(480i)
0
1 Disp Dots 666 0 ~ 4095
2 H Back Porch 142 0 ~ 4095
3 V Back Porch 52 0 ~ 4095
4 Disp Line 448 0 ~ 4095
Group 511 SCART (575i)
0
1 Disp Dots 648 0 ~ 4095
2 H Back Porch 170 0 ~ 4095
3 V Back Porch 68 0 ~ 4095
4 Disp Line 526 0 ~ 4095
Group 520 YCbCr (480i)
0 Total Dots 890 0 ~ 4095
1 Disp Dots 696 0 ~ 4095
2 H Back Porch 150 0 ~ 4095
3 V Back Porch 448 0 ~ 4095
4 Disp Line 458 0 ~ 4095
Group 521 YCbCr (575i)
0 Total Dots 920 0 ~ 4095
1 Disp Dots 704 0 ~ 4095
2 H Back Porch 170 0 ~ 4095
3 V Back Porch 62 0 ~ 4095
4 Disp Line 542 0 ~ 4095
Group 522 YCbCr (480P)
0 Total Dots 858 0 ~ 4095 * Read only
1 Disp Dots 684 0 ~ 4095
2 H Back Porch 148 0 ~ 4095
3 V Back Porch 60 0 ~ 4095
4 Disp Line 460 0 ~ 4095

Sanyo PLC-XT25 Specifications

General

Projection technology	LCD
Contrast ratio (typical)	1000:1
Projector native resolution	XGA (1024x768)
Resolution	1024 x 768 pixels
Dimensions (WxDxH)	302 x 422 x 162 mm
Display diagonal	1 \
Lamp type	UHP
Lamp power	300 W
Light source type	Lamp
Market positioning	Portable

Weight and Dimensions

Weight	9200 g