40
Chapter 4 Controlling the Projector
Item Description
Ceiling.....................Sets the image top/bottom and left/
right reversed. (ON, OFF)
Rear...........................Sets the image left/right reversed. (ON,
OFF)
Power
management.....Sets into the selected power manage-
ment mode (Ready, Shutdown, OFF) if
the input signal is interrupted and no
control key is pressed for the specified
period of time.
*The specified time can be set 1 t
o 30
min.
On start ..................Sets the power-on mode when the AC cord is connected to the outlet.
Lamp control......Selects lamp control mode. (High, Normal, Eco)
Item Description
Language..............Sets the language display of projector's
on-screen display menu.
Auto setup...........Executes the Auto PC Adj, and Input
Search function below according to the
each setting after clicking
Start button.
Auto PC Adj. .....Sets Auto PC Adjustment mode. (ON,
OFF)
Input search .....Sets the auto-input signal detection
mode. (ON1, ON2, OFF)
Auto keystone....
Sets Auto Keystone mode. (Auto, Manual,
OFF)
Background.........Sets the screen background when no signal input. (Blue, User, Black)
Display....................Switches on or off the on-screen menu display on the screen. (OFF, Countdown Off,
ON)
Countdown off .......
Displays image during the starting up.
Logo .........................Sets on or off the logo display on the screen during the startup. (OFF, Default, User)
Setting 1
Setting 2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
