EasyManua.ls Logo

Sanyo PLC XU115 - XGA LCD Projector

Sanyo PLC XU115 - XGA LCD Projector
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
Computer Input
Store
ExittheImageAdjustMenu.
Quit
Storeicon
Tostoretheadjusteddata,selectStoreandpressthe
SELECTbutton.UsethePoint▲▼buttonstoselectone
fromImage1to4andpresstheSELECTbutton.
Aconfirmationboxappearsandthenselect[Yes].Stored
datacanbecalledupbyselectingan“Image(1–4)”inthe
ImageModeSelectiononpage36.
ImageModeMenu
Move the red frame
pointer to an image
item to be set and
t h e n p r e s s t h e
SELECTbutton.
A confirmation
box app e a r s
and then select
[Yes]
Thisprojectorhasthepicturescreenresizefunction,whichenablesyoutocustomizetheimagesize.
Screen Menu
Screen Size Adjustment
Providetheimagetofitthescreensize.
Normal
True
Provide the image in its original size. When the original
imagesizeislargerthanthescreensize(1024x768),the
projectorenterstothepanningmodeautomatically.Usethe
Point▲▼◄►buttonstopantheimage.Whenadjusted,the
arrowswill turn red.When reached tothe correction limits,
thearrowswilldisappear.
Full
Providethefullscreenimage.
Notes:
•The Screen Menu, except for "Normal"
and"Custom",cannotbeoperatedwhen
720p(HDTV), 1035i (HDTV), or 1080i
(HDTV) is selected in the PC System
Menu(p.32).
•This projector cannot display any
resolution higher than 1600 x 1200. If
your computer’s screen resolution is
higherthanit,resettheresolutiontothe
lowerbeforeconnectingtotheprojector.
•Theimagedatainotherthan1024x768
ismodifiedtofitthescreensizeininitial
mode.
•True, Full, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p, or
575pisselectedinthePCSystemMenu
(p.32).
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
framepointertotheScreenMenuicon.
1
Use the Point buttons to move the red frame
pointer to the desired function and then press the
SELECTbutton.
2
Wide
Providetheimagetofitthewidevideoaspectratio(16:9)by
expanding the image width uniformly. This function canbe
usedforprovidingasqueezedvideosignalat16:9.
Move the red frame
pointer to the function
andpresstheSELECT
button.
ScreenMenuicon

Table of Contents

Other manuals for Sanyo PLC XU115 - XGA LCD Projector

Related product manuals