Sanyo PLC XU115 - XGA LCD Projector

40
Choose Video by pressing the INPUT button on the top
controlortheVIDEObuttonontheremotecontrol.
Beforeusing these buttons,correctinput sourceshouldbe
selectedthroughmenuoperationasdescribedbelow.
Use the Point ▲▼ buttons to move the red arrow
pointertoVideoandthenpresstheSELECTbuttonto
displaytheSourceSelectMenu.
1
2
Move the pointer to
Videoandpressthe
SELECTbutton.
VIDEO
Movethepointertothesource
that you want to select and
presstheSELECTbutton.
Source Select Menu (VIDEO)
Input Menu
Movethepointertothedesiredsourceandthenpress
theSELECTbutton.
3
Input Source Selection (Video, S-video)
InputMenuicon
Video Input
Computer 1 (Analog)
Video
Computer 2
INPUT button
VIDEO button
Wired
Top Control
INPUT button
Computer 1 (Digital)
Remote Control
Direct Operation
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
framepointertotheInputMenuicon.
WhenselectingAuto,theprojectorautomatically
detects incoming video signal, and adjusts
itself to optimize its performance. The projector
selectsconnectioninthefollowingorder:
1.S-video
2.Video
Auto
Whenvideoinputsignalisconnectedtothe
VIDEOjack,selectVideo.
Video
WhenvideoinputsignalisconnectedtotheS-
VIDEOjack,selectS-video.
S-video
Notes:
 •Wired and Wireless are for the Network function. See
owner’smanual“NetworkSet-upandOperation”.
 •WhentheInputSearchfunctionissetto“On1”or“On2”,
theinputsignalwillbesearchedautomatically(p.51).
Wireless