48
Setting
Display
Blue back
Whenthisfunctionis“On,”ablueimageisdisplayedwhile
theinputsignalisnotdetected.
Keystone
This function is used to store or reset the keystone
correction when theACpower cord is unplugged. Use the
Point◄►buttonstoswitchbetweeneachoption.
Store ........ Keep the keystone correction even when the
ACpowercordisunplugged.
Reset .......ReleasethekeystonecorrectionwhentheAC
powercordisunplugged.
To correct keystone distortion, press the SELECT button.
The“Keystone” appearson thescreen. Usethe Point▲▼
buttonstocorrectkeystonedistortion(p.26).
Keystone
ThisfunctiondecideswhethertodisplayOn-ScreenDisplays.
On ............................ Show all the On-Screen displays. Use
this function when you want to project
images after the lamp becomes bright
enough.Thefactorydefaultsettingisin
thisoption.
CountdownOff ......... Show the input image instead of
the countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
brightenough.
Off ............................ HidetheOn-ScreenDisplaysexcept;
●On-ScreenMenu
●“Poweroff?”(p.23)
●“Nosignal”forPowermanagement
(p.52)
●“Pleasewait...”
●ArrowsfortheTruefunctioninthe
ScreenMenu(p.38)
UsethePoint◄►
buttonstoswitch
betweentheoptions.
To Next Page
Loading...
Need help?
General