Sanyo PLC XU115 - XGA LCD Projector User Manual

50
Logo PIN code lock
Setting
This function prevents an unauthorized person from
changingthescreenlogo.
 Off ............Thescreenlogocanbechangedfreelyfrom
theLogoMenu(p.49).
 On ............Thescreenlogocannotbechangedwithout
aLogoPINcode.
If you want to change the Logo PIN code lock setting,
presstheSELECTbuttonandtheLogoPINcodedialog
box appears. Enter a Logo PIN code by following the
stepsbelow.TheinitialLogoPINcodeissetto“4321”at
thefactory.
Logo PIN code lock
Enter a Logo PIN code
Use the Point ▲▼ buttons to enter a number. Press the
Point►buttontofixthenumberandmovetheredframe
pointertothenextbox.Thenumberchangesto“.”Ifyou
fixedanincorrectnumber,usethePoint◄buttontomove
the pointer to the number you want to correct, and then
enterthecorrectnumber.
Repeatthissteptocompleteenteringafour-digitnumber.
After entering the four-digit number, move the pointer to
“Set.” Press the SELECT button so that you can start to
operatetheprojector.
If you entered an incorrect Logo PIN code, “Logo PIN
code”andthenumber()willturnredforamoment.
EnterthecorrectLogoPINcodealloveragain.
Change the Logo PIN code
LogoPINcodecanbechangedtoyourdesiredfour-digit
number. Press the Point ▼ button to select “Logo PIN
code change” and then press the SELECT button. The
NewLogoPINcodeinputdialogboxappears.Setanew
LogoPINcode.
Be sure to note the new Logo PIN code and keep it at
hand.Ifyoulostthenumber,youcouldnolongerchange
the Logo PIN code setting. For details on PINcode
setting,referto“PINcodelock”onpages54–55.
Use the Point ◄► buttons to switch On/Off, and then
press the Point ▼ button to move the pointer to “Quit.”
PresstheSELECTbuttontoclosethedialogbox.
Change the Logo PIN code lock setting
Enter a Logo PIN code
AfteracorrectLogoPINcode
isentered,thefollowingdialog
boxappears.
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO
PIN CODE, WRITE DOWN THE NEW PIN
CODE IN COLUMN OF THE LOGO PIN CODE
NO. MEMO ON PAGE 76, AND KEEP IT
SECURELY. SHOULD THE LOGO PIN CODE
BE LOST OR FORGOTTEN, THE LOGO
PIN CODE SETTING CAN NO LONGER BE
CHANGED.
Change the Logo PIN code lock setting
Change the Logo PIN code
UsethePoint◄►buttonsto
switchOn/Off.

Sanyo PLC XU115 - XGA LCD Projector Specifications

General

Brand	Sanyo
Model	PLC XU115 - XGA LCD Projector
Category	Projector
Language	English