-47-
Electrical Adjustments
Group/
Item
Item Name Function Initial Range Note
11
OnStart Cooling Start
Threshold
38
0-100
12 After shutdown cooling Cooling after shutdown (0: No, 1: Yes) 1 0-1
Group
256
Fan/Lamp Voltage Dimmer Setting
0 Lamp Voltage - 0-1792
1 Lamp Vol Threshold 0 30-90
2 Fan 1 Speed Gain 10
0-255
3 Fan 2 Speed Gain 10 0-255
4 Fan 3 Speed Gain 10 0-255
Group
257
Fan Dimmer Setting
0
Dimmer Average Chech
Period
Dimmer Average measurement
Time (0:10sec. 1:30sec. 2:60 sec.
3:90sec...10:300sec.)
0 0-10
1 Dimmer Average Dimmer Average Value (Read only) -
2 Last Voltage Difference -
3 Voltage Difference Goal -
Group
258
Fan Network IC temperature rising resolve
0
Standby Cooling Check Cycle
9999
1
Standby Cooling Start
Threshold
9999
2 Standby Cooling Enable 9999
Group
259
Fan MIC IC temperature rising resolve
0 Standby Fan C Voltage 52
Group
260
Auto Calibration(Common)*Auto Calibration
0 Execute Calibration 0 0 - 1
Executes Auto-Calibration when
changiing the Value (PC White
100%)
1 Loop Count
Maximum Execution Times
(OFFSET->GAIN)
10 1 - 30
2 Auto Status
Result of Auto-Calibration (Last
Memory)
0 0 / 1 / 9
0: OK, 1: Adjusting,9: Error *
ReadOnly
3 AutoWait Wait Value for each setting 1 1 - 20
4 CHECK -Tolelance Torelance of OFFSET 2 1 - 255
Group
261
Auto Calibration (RGB)
0 OFFSET AREA H START
Black Level Acquiring Area H-Start
Position
975 0 - 1000
1 OFFSET AREA V START
Black Level Acquiring Area V-Start
Position
500 0 - 1000
2 GAIN AREA H START
White Level Acquiring Area H-Start
Position
25 0 - 1000
3 GAIN AREA V START
White Level Acquiring Area V-Start
Position
500 0 - 1000
4 Image AREA H WIDTH Black/White Level Acquiring Area 13 0 - 4095
5 Image AREA V HIGHT
Black/White Level Acquiring Area
Height
9 0 - 4095
6 OFFSET target Target Value of Black Level Adj. 3 0 - 127
7 OFFSET torelance Torelance of Black Level Adj. 1 1 - 127
8 GAIN target Target Value of White Level Adj. 238 0 - 255
9 GAIN torelance Torelance of White Level Adj. 1 1-255
Group
262
Auto Calibration (CVBS/SVIDEO)
0 Y Image Area Start X Y Acquiring Area H-Start Position 20 0-1000
1 Y Image Area Start Y Y Acquiring Area V-Start Position 200 0-1000
6 Image Area H Width Image Level Acquiring Area 8 0-4095
7 Image Area V Hight Image Level Acquiring Area Height 9 0-4095
8 Y Target Level Target Value of Y Level Adj. 217 0-255
11 Gain Tolerance Torelance of Level Adj. 1 0-255
12 Delta Gain Deviation Width of Gain Value 9 0-255
Group
264
Auto Calibration (YCbCr)
0 Y-OFFSET AREA H START
Y - Offset Acquiring Area H-Start
Position
925 0 - 1000
To Next Page
Loading...
Need help?
General
