Sanyo PLC-XU4000 - Connecting to Component Video Equipment

16
Installation
Connecting to Component Video Equipment
 Note:
 •When theAUDIO OUTis plugged-in, the projector's
built-in speaker is not available.
 •Seepage73fororderingoptionalcables.
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
External Audio Equipment
COMPUTER
AUDIO IN 1
Audio cable
(stereo)
Audio
cable
(stereo)
Audio Input
Component Video Output
(Y, Pb/Cb, Pr/Cr)
RGB Scart
21-pin Output
Audio Output
Scart-VGA
cable
Component-
VGA cable
AUDIO OUT
(stereo)
Component
cable
COMPUTER IN 1/ COMPONENT IN
Cables used for connection
•AudioCables
•Scart-VGACable
•VGACable
•ComponentCable
•Component-VGACable
(Cables are not supplied with this projector.)
Monitor Input
COMPUTER IN 2 /
MONITOR OUTPUT
VGA cable
Downloaded From projector-manual.com Sanyo Manuals