44
This projector has the picture screen resize function, which enables you to customize the image size.
Screen Size Adjustment
Screen Menu
1
2
Note:
•When no signal is detected, Normal is set
automatically and the Aspect dialog box
disappears.
•The adjustable range for Scale H/V and
Position H/V is limited depending on the
input signal.
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Screen and
then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons select the desired item and
then press the SELECT button.
Provide the image to fit the screen size.
Normal
Full
Provide the full screen image.
Wide (16:9)
Provide the image at the 16:9 wide screen ratio.
Zoom
Scale the image proportionally to fit the entire screen. Either
side of image may go over the screen.
Custom
Provide the last stored aspect screen image.
Adjust the screen scale and position manually with this
function.
Press the Point ► button at Custom and the Custom is
displayedonthescreen,youcanusethePoint▲▼
buttons
to choose the item you want to adjust.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V ................... When set to On, the aspect ratio is
fixed. The Scale V appears dimmed and
becomes unavailable. Adjust Scale H,
then the screen scale is automatically
modified based on the aspect ratio.
Position H/V ..... Adjust the Horizontal/Vertical screen
position.
Common ........... Save the adjusted scale or position to all
the inputs. Press the SELECT button at
Common to display a confirmation box.
To save the scale or position, press the
SELECT button at Yes. When Custom
is selected, the saved scale or position is
used.
Reset ................. Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at Yes.
Custom adj.
Video Input
Downloaded From projector-manual.com Sanyo Manuals
To Next Page
Loading...
Need help?
General
