45
When this function is set to On, the picture will be top/bottom
and left/right reversed. This function is used to project the
image from a ceiling-mounted projector.
Ceiling
When this function is set to On, the picture will be left/right
reversed. This function is used to project the image from
rear of the screen.
Rear
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
Reset
Keystone
This function is used to adjust keystone distortion of the
projectedimage.Use the Point▲▼buttonstochoose the
item you want to adjust.
Keystone
To correct keystone distortion, press the SELECT button.
Keystone appears on the screen. Use the Point ▲▼
buttons to correct keystone distortion (p.23).
Store
To store or reset the keystone correction, press the
SELECT button.
Store
............
Keep the keystone correction even when
the AC power cord is unplugged.
Reset............ Release the keystone correction when the
AC power cord is unplugged.
Ceiling
Rear
Keystone
Video Input
Downloaded From projector-manual.com Sanyo Manuals
To Next Page
Loading...
Need help?
General
