76
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost
the number and unable to operate the projector, contact the service center.
PIN Code Number Memo
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
Put the label below (supplied) on in a prominent place of the
projector's body while it is locked with a PIN code.
While the projector is locked with the PIN code.
PIN Code Lock No.
Logo PIN Code Lock No.
*Should the four-digit number be changed,
the factory set number will be invalid.
Appendix
Downloaded From projector-manual.com Sanyo Manuals
To Next Page
Loading...
