74
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information
System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified
conformance with PJLink Standard Class 1.
For PJ Link password, see the owner’s manual of “Network Set-up and Operation.”
Projector Input
RGB
Computer 2 (Analog)
Component
RGB (Scart)
PJLink Input
RGB 1
RGB 3
VIDEO 2
RGB 2
Video
S-video
VIDEO 1
VIDEO 5
Computer 1
Video
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
PJ Link Notice
Parameter
11
13
22
12
21
25
Appendix
Attaching the Filter Cover to the projector
The supplied filter cover is designed for preventing dust
accumulation on the filter when mounting the projector on
the ceiling.
To Ceiling Mount
Filter
Cover
(supplied)
Projector
For attaching the filter cover to the projector, push the
cover as the picture shown. (For removing the filter
cover, push the cover to the opposite direction.)
Turn over the projector.
1
3
Attach the projector to the ceiling mount in accordance
with the instruction manuals which come with the ceiling
mount.
4
2
Before attaching the filter cover to the projector,
removing the filter cover (bottom) first. See page 61 for
removing.
Note:
Please keep the filter cover (bottom) for later use.
Downloaded From projector-manual.com Sanyo Manuals
To Next Page
Loading...
Need help?
General
