32
Store
To store the adjusted data, select Store and then press the
Point ► button or the SELECT button. Move the highlight
to one of the Modes 1 to 10 in which you want to store, and
then press the SELECT button.
Mode free
To clear the stored data, select Mode free and then press
the Point ► button or the SELECT button. Move the
highlight to the Mode that you want to clear and then press
the SELECT button.
Note:
•Display area (H/V) cannot be selected when 480i, 575i,
480p, 575p, 720p, 1035i or 1080i is selected in the PC
System Menu (p.29).
•Wheninputcomputersignaltotheprojector,PC adjust
will become available.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
This Mode has stored
parameters.
Values of Total dots, Horizontal,
Vertical, Display area H and
Display area V.
Vacant
Press SELECT button to
store adjusted data
Press MENU button
to close this dialog
box.
Computer Input
Mode free
Store
Downloaded From projector-manual.com Sanyo Manuals
To Next Page
Loading...
Need help?
General
