EasyManuals Logo

Sanyo PLV-Z3000 Owner's Manual

Sanyo PLV-Z3000
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
33
To store the adjusted data, select Store and press the Point 8 or
OK buttons. The User Image Mode Menu appears. Use the Point
ed buttons to choose one of the seven (7) user image modes
and press the Point
8 or OK buttons. A confirmation box appears.
Select [Yes] and then press the OK button.
To exit the User Image Mode Menu, go to the Quit icon and press
the Point
8 or OK buttons. The stored data can be called up by
selecting “User image 1 – 7” in the Image Mode Selection on
page 27.
Store
To reset the adjusted data, select Reset and press the Point
8 or
OK buttons. A confirmation box appears. Select [Yes] and then
press the OK button. All adjustments return to their previous
figures. You can also reset the adjusted data by pressing the
RESET button on the remote control.
Reset
Press the Point
8 or
OK buttons to store the
adjusted data. The User
Image Mode Menu
appears.
Note:
•Ifyouchangetheimagemode(seepage27)orturnoffthe
POWERwithoutstoringadjustedsettings,alltheadjustedsettings
willbereset.
•Whenresetting,theadjusteddatainAdvancedmenuwillbereset
whetherornotAdvancedmenuintheSettingMenuis“On.”See
page37.
Image Adjustment
Quit
Press the Point
8 or OK buttons
to exit the User
Image Mode
Menu.
Choose one of the seven (7) user
image modes with the Point
ed
buttons and press the Point
8 or
OK buttons. The confirmation box
appears.
Select [Yes] and then press the
OK button.

Other manuals for Sanyo PLV-Z3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sanyo PLV-Z3000 and is the answer not in the manual?

Sanyo PLV-Z3000 Specifications

General IconGeneral
Matrix size0.7 \
Vertical scan range50 - 100 Hz
Horizontal scan range15 - 80 kHz
Projection technologyLCD
Contrast ratio (typical)-
Screen size compatibility40 - 300 \
Aspect ratio16:9
RS-232 ports1
Dimensions (WxDxH)400 x 146 x 346 mm
Lamp typeUHP
Lamp power165 W
Light source typeLamp
Service life of light source2000 h
Service life of light source (economic mode)3000 h
FocusManual
Focal length range22.3 - 45.3 mm
Noise level19 dB
Dot clock scanning frequency100 MHz
Serial interface typeRS-232
Component video (YPbPr/YCbCr) in3
Weight and Dimensions IconWeight and Dimensions
Weight7500 g

Related product manuals