Sanyo SPW-CR703GDCH8 - Page 112

Control of W-ECO MULTI SYSTEM
3
TD831077
III - 54
1 At first, press the program button.
¶ The operation reserva-
tion display “ ” starts
flashing as soon as the
program button is
pressed.
2 Select the day of program operation by pressing the
DAY button, and press the SET button.
The reservation operation display “ ” changes from
flashing to ON state as soon as the SET button is
pressed, and the ON time of program 1 starts
flashing at the same time.
3 Set the ON time by pressing the HH. and MM.
buttons, and press SET button.
As soon as the SET button is pressed, the ON time
(8:00 in the example) changes from flashing to ON
state, and at the same time the OFF time of program
1 starts flashing.
CHECK
CANCEL
CLEAR
PROGRAM
DAY
HH
MM
SET
Su Mo Tu We Th Fr Sa
PROGRAM ERROR
OFFON
PROGRAM 1
PROGRAM 2
PROGRAM 3
CLOCK
10 42_1143
❚
CHECK
CANCEL
CLEAR
PROGRAM
DAY
HH
MM
SET
Su Mo Tu We Th Fr Sa
PROGRAM ERROR
OFFON
PROGRAM 1
PROGRAM 2
PROGRAM 3
CLOCK
10 43 _1143
❚
CHECK
CANCEL
CLEAR
PROGRAM
DAY
HH
MM
SET
Su Mo Tu We Th Fr Sa
PROGRAM ERROR
OFFON
PROGRAM 1
PROGRAM 2
PROGRAM 3
CLOCK
10 44 _1143
4 Set the OFF time by pressing the HH. and MM.
buttons, and press SET button.
As soon as the SET button is pressed, the OFF time
(12:00 in the example) changes from flashing to ON
state, and at the same time the ON time of program 2
starts flashing.
5 Next, set the operating times of programs 2 and 3.
As soon as the SET button is pressed after setting
the OFF time of program 3, the OFF time (19:00 in
the example) changes from flashing to ON state, and
at the same time the ON time of program 1 starts
flashing.
CHECK
CANCEL
CLEAR
PROGRAM
DAY
HH
MM
SET
Su Mo Tu We Th Fr Sa
PROGRAM ERROR
OFFON
PROGRAM 1
PROGRAM 2
PROGRAM 3
CLOCK
10 45 _1143
CHECK
CANCEL
CLEAR
PROGRAM
DAY
HH
MM
SET
Su Mo Tu We Th Fr Sa
PROGRAM ERROR
OFFON
PROGRAM 1
PROGRAM 2
PROGRAM 3
CLOCK
10 46 _1143
2. Optional Controller (weekly timer)