Sanyo SPW-CR703GDCH8 - Page 116

Control of W-ECO MULTI SYSTEM
3
TD831077
III - 58
CHECK
CANCEL
CLEAR
PROGRAM
DAY
HH
MM
SET
Su Mo Tu We Th Fr Sa
PROGRAM ERROR
OFFON
PROGRAM 1
PROGRAM 2
PROGRAM 3
CLOCK
10 63 _1143
❚
❚
❚
(H) Clearing a program operation
¶ Clearing the program of the day
1 Press PROGRAM
button.
2 Press DAY button and
bring the operation
reservation indicator
“ ” at the day to be
cleared.
3 Press CLEAR button.
The program times
disappear.
4 Press PROGRAM
button. The operation
reservation indicator
“ ” disappears.
¶ Clearing a part of the program
1 Press PROGRAM button.
2 Press DAY button and bring the operation reservation
indicator “ ” at the day whose part of the program is
to be cleared.
3 Press SET button.
4 Press SET button once again, and make the ON or
OFF time of the program to be cleared flash.
5 Press CLEAR button.
Part of the program disappears, and at the same time
the remaining programs automatically get rear-
ranged.
6 Press PROGRAM button.
(I) Cancelling the temporary program operation
¶ Operation reservation in unit of days can be tempo-
rarily cancelled, using CANCEL button.
1 Press the CANCEL
button.
The cancel set indica-
tion “I I” starts flashing.
2 Press the DAY button,
and bring the cancel set
indicator “I I” at the day
which is to be set as a
cancel day.
3 Press SET button. The
cancel set indicator “I I”
changes from flashing
to ON state ( ).
¶ Cancelling a set cancel day
1 Press the CANCEL button.
2 Press the DAY button, and bring the cancel set
indicator “I I” at the day which is to be cancelled as a
cancel day.
3 Press SET button.
The cancel set indicator “I I” disappears, and the
display changes over to operation reservation display
().
CHECK
CANCEL
CLEAR
PROGRAM
DAY
HH
MM
SET
Su Mo Tu We Th Fr Sa
PROGRAM ERROR
OFFON
PROGRAM 1
PROGRAM 2
PROGRAM 3
CLOCK
10 64 _1143
❚
¶ Description of operation
The operation is temporarily cancelled on the day
which is set as a cancel day, but on the following day
the cancel set indicator “I I” disappears automatically
and operation reservation indicator “ ” is restored.
¶ The day for which no program has been set cannot
be set as a cancel day.
❚
NOTE
2. Optional Controller (weekly timer)