Sanyo SPW-CR703GDCH8 - Page 117

Control of W-ECO MULTI SYSTEM
3
TD831077
III - 59
¶ Restarting operation
1 Start the air conditioner with remote controller.
2 Press the PROGRAM button of weekly timer.
The colon of current time changes from flashing to ON state, and regular status is restored.
In this case the set program operation is kept memorized by the back up function, so it need not be set again.
2. Operations of the weekly timer and air conditioner
The air conditioner fitted with a weekly timer is operated with either a remote controller or with a weekly timer.
(J) Others
Some information on this weekly timer
1. Power Failure
If a power failure occurs during operation, and the power
supply is later recovered, the display appears as shown
on the right.
(The colon “ : ” of current time flash).
Su Mo Tu We Th Fr Sa
PROGRAM ERROR
OFFON
PROGRAM 1
PROGRAM 2
PROGRAM 3
CLOCK
1066_1143
Example
1 Operation pattern of 1 day (static signal)
Su Mo Tu We Th Fr Sa
1068_1143
Operation
by weekly
timer
No operation
by weekly timer
(no operation
reservation)
No operation
by weekly timer
(operation is
reserved, but
it is cancelled
with cancel set)
1067_1143
ON OFF ON OFF ON OFF
8:00 12:00 12:40 16:5017:00 19:00
Press
Press Press
Press
Program timer
ON / OFF setting
Remote controller
operation ON / OFF
button
Operation of
air conditioner
ON
OFF
CHECK
CANCEL
CLEAR
PROGRAM
DAY
HH
MM
SET
Su Mo Tu We Th Fr Sa
PROGRAM ERROR
OFFON
PROGRAM 1
PROGRAM 2
PROGRAM 3
CLOCK
10 65 _1143
2. Optional Controller (weekly timer)