II - 23
2
TD831077
Design of W-ECO MULTI SYSTEM
3-4. Maximum power input
¶ The maximum power input of the outdoor unit is a electric power input consumed when the outdoor unit is oper-
ated under the condition of the JIS cooling overload at the indoor / outdoor unit capacity ratio of 130 %.
¶ The maximum power input at the indoor / outdoor unit capacity ratio of less than 130 % can be caluculated by
multiplying the input coefficient calculated using the diagram below by the maximum power input.
3. Electrical Wiring
¶ How to calculate
Find out the input coefficient from the intersecting point of the above
indoor / outdoor capacity ratio graph.
You can calculate by multiplying the input coefficient by the maxi-
mum power input.
100
90
91
92
93
94
95
96
97
98
99
100
%
105 110 115 120 125
Indoor / outdoor capacity ratio
Input coefficient
130
0191_M_I
%
To Next Page
Loading...
