ZOOM SETTING
Setting the optical zoom (video clip shooting
only)
The optical zoom can be used during video clip photography, but the noise
from the zoom movement may be picked up by the microphone and be
audible during playback. In this case, you can change the camera setting so
that the optical zoom does not move.
1
Display the Video Clip Shooting Setting Screen (see page 39).
2
Select an optical zoom shooting
setting from the optical zoom menu.
\: Optical zoom is disabled during
video clip shooting.
[: Optical zoom is enabled during
video clip shooting.
3
Press the SET button.
œ This completes the optical zoom
setting.
HINT
œ Even when the optical zoom setting is set to \, the zoom can be still
operated whenever the camera is not recording. This means that you an
use the zoom switch to compose the picture before actually beginning
recording.
OPTICAL ZOOM
00:49
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
107
To Next Page
Loading...
