EDITING VIDEO CLIPS
9
Press the SET button.
œ “EDIT” and then “LOADING” are
displayed, after which you are
returned to the Edit Video Screen.
œ The two video clips are saved
together as a separate video clip.
œ If “YES” was selected in step 8, the
original video clips are erased when
the joined video clip is saved.
œ Press the MODE button, or select
the C icon and press the SET
button, to return to the Playback
Setting Screen.
NOTE
œ If the original video clip is protected, even if you select “YES” in step 8 and
press the SET button, the original video clip will not be erased. If you want
it to be erased, you will need to first remove the protection (see page 155).
EDIT
DO NOT
POWER OFF
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
147
To Next Page
Loading...
Need help?
General
