USING THE CAMERA WITH A COMPUTER
4
Set the selector dial to [Ü], and
turn on the power.
œ The camera changes to the PC
connection mode.
œ When the camera is connected to a
personal computer, you can use the
Sanyo Software Pack to copy the
data in the camera’s card to your
computer (download).
œ More information about these
operations can be found in the
instructions included with the Sanyo
Software Pack.
NOTE
œ When your digital camera is connected to a computer, there is no display
on the LCD monitor.
Selector dial
Power button
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
163
To Next Page
Loading...
