5
Set the clock.
1 Press [l] to select the À icon.
2 Turn the jog dial and press the
arrow button to set the time to
“19:30”.
œ Hour setting → [c] → Minute setting.
œ A 24-hour clock is used for the time
display.
6
Select the C icon, and press the
SET button.
œ The date and time setting is
completed, and you are returned to
the Option Setting screen.
NOTE
œ If the date and time are not set, February 1, 2002 midnight is recorded as
the date and time. Consequently, “2002/02/01 00:00” appears during
playback.
œ Under normal conditions, while the batteries are replaced, an internal
battery will maintain the date and time settings. However, there is a small
chance the settings may be lost. (The backup will last for approx. 30
minutes.) It is recommended to check that the date and time settings are
still correct after replacing the batteries and before shooting or recording of
any type (follow steps 1 and 2).
To correct the date and time settings.
œ After steps 1 and 2, press [l] to select the line of the setting that you want
to change, and press [c] to select that setting. Then use the jog dial to set
the new setting.
CLOCK SET
p
DISP ON
Y/M/D
p
2002/08/28
p
19:30
SELECT
SETTING
AUDIO REC
COLOR ADJUSTMENT
CLOCK SET
BEEP
FILE NUMBER RESET
DISCHARGE
LANGUAGE
TV SYSTEM
REFORMAT
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
166
To Next Page
Loading...
Need help?
General
