Sanyo VPC-MZ2EX User Manual

TROUBLESHOOTING
Problem Cause Action
Reference
page
Viewing images
The image is
too dark.
The flash was
blocked by a finger
or other object.
Hold the digital
camera correctly,
and make sure the
flash is not
obstructed.
53
The subject was
too far away.
Capture the image
in the range of
operation of the
flash.
74
The subject was lit
from behind.
Use the forced
flash mode.
Use the exposure
correction function.
78
There is not
enough light.
Adjust the shutter
speed.
100, 101
Adjust the ISO
sensitivity setting.
103
The image is
too bright.
The forced flash
mode is selected.
Select a different
flash mode.
72
The subject was
too bright.
Change the angle
of the digital
camera.
—
Use the exposure
correction function.
78
The ISO sensitivity
setting is incorrect.
Set the ISO
sensitivity to B.
103
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
189

Sanyo VPC-MZ2EX Specifications

General

Brand	Sanyo
Model	VPC-MZ2EX
Category	Digital Camera
Language	English