Sanyo VPC-MZ2EX - Page 199

Problem Cause Action
Reference
page
Miscellaneous
The digital
camera cannot
be operated.
A temporary
internal circuitry
problem may be
the cause.
Remove the
batteries from the
digital camera, wait
a few minutes then
reinstall the
batteries and try
again.
—
The “SYSTEM
ERROR”
message
appears.
A problem has
occurred within the
digital camera or
card.
Check the
following items
—
1
Remove the card
and then install it
again.
2
Remove the
batteries and then
install them again.
3
Remove the
batteries, wait
approx. 1 hour,
and then install
them again.
4
Install a different
card.
If “SYSTEM
ERROR” still
appears after
performing the
above steps, then
take the digital
camera to the
dealer for service.
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
196