Where is the image and audio data saved?
œ All the image and sound data is recorded on the card installed in the
camera (see page 160).
Taking pictures in backlight conditions...
œ When taking pictures with the light coming from behind the subject, due to
the characteristics of the lens, light lines or patterns (flare phenomenon)
may appear in the captured image. In this situation, it is recommended that
you avoid taking pictures with the subject lit from behind.
NOTE
About sequential shots shooting
œ In sequential shots shooting, the autofocus function is activated when the
shutter release button is pressed and remains fixed at the same focus until
the sequential shots are finished.
If the motion alert icon appears...
œ During still image shooting, if the shutter speed is slow and the possibility
that the image may be blurred due to camera movement becomes high, the
motion alert icon T may appear on the LCD monitor. In this case, use a
tripod to stabilize the camera when shooting, set the exposure control (see
page 99) to Ï, or set the flash operation mode to automatic (see page
72).
12
8.0
1S
Motion alert icon
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
56
To Next Page
Loading...
Need help?
General
