Standard sequential shots Ö
1
Set the camera to the sequential
shots shooting mode (see page 39).
2
Select the standard sequential
shots icon Ö from the sequential
shots mode menu, and press the
SET button.
3
Select the desired frame interval
from the sequential shots interval
menu, and press the SET button.
Ù: Images are captured at intervals
of 0.2 second.
": Images are captured at intervals
of 0.1 second.
!: Images are captured at intervals
of 0.06 second (only appears
when the resolution is set to
4).
Ú: Images are captured at intervals
of 0.05 second (only appears
when the resolution is set to
4).
4
Select the desired shutter operation
from the shutter release button
operation menu and press the SET
button.
$: Images are captured only while
the shutter release button is
pressed.
#: Capturing of the images starts
when the shutter release button
is pressed and stops when it is
pressed again.
METHOD
23
INTERVAL
23
23
SHUTTER
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
60
To Next Page
Loading...
Need help?
General
