USING THE VARIOUS SHOOTING FUNCTIONS
3
Press the flash button to select the
flash mode.
œ Each time the flash button is
pressed, the flash mode icon
changes.
No icon: The digital camera will
detect the subject
brightness and use the
flash only when required.
In a backlight situation, if
only the center of the
image is very dark, the
flash will operate to
compensate (auto flash).
d: The flash will operate with every image captured regardless of
the conditions. Use this setting under backlight conditions, when
the subject is in shade, under fluorescent lighting conditions, etc.
(forced flash).
j: The flash will not operate even in dark situations. Use this setting
when capturing an image in a location where flash photography
is prohibited, or when shooting a night landscape scene (flash
off).
È: The digital camera will detect the subject brightness and use the
flash only when required. At this time the flash will operate in a
manner that reduces the red reflection (“red-eye”) in the
subject’s eyes.
4
Press the shutter release button.
œ The image is captured in the desired flash mode.
<Shooting without using the LCD monitor>
1Press the flash button.
œ
The LCD monitor turns on briefly to show the currently set flash
mode.
2Press the flash button within 5 seconds to set the desired flash
mode.
13
3.1
1/50
Flash mode
SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
English
73
To Next Page
Loading...
Need help?
General
