SX215/EX, U (VPC-MZ2 GB) Mon. March 25/2002
Playing back images on a TV set
By connecting the digital camera to a television set, you can view the
captured images on the TV screen.
Connections
Connect the supplied AV cable from the DIGITAL/AV terminal on the digital
camera to the AUDIO and VIDEO input terminals on the TV.
Plug
White plug
To the VIDEO input terminal To the DIGITAL/
AV terminal
Yellow plug
AV cable (supplied)
To the AUDIO
input terminal
Switch input to VIDEO
* If the dedicated AV cable is unplugged/plugged in, the Playback Setting
Screen is canceled.
Playback
œ After connecting the digital camera to the television, set the TV input switch
to VIDEO input.
œ The playback method is the same as when viewing images on the LCD
monitor.
œ When an AV cable is connected, the LCD monitor display appears smaller
than usual.
œ If the TV system setting is set to PAL, no image appears on the camera’s
LCD monitor.
œ The same playback procedure as when playing back with the camera is
used to play back voice memos and audio recordings as well.
œ The sound output from the digital camera is monaural.
Voice memo playback: see page 82
Audio recording playback: see pages 81, 87
CAUTION
œ Do not use excessive force when connecting and disconnecting cables.
English
92
To Next Page
Loading...
Need help?
General
