Sapido BRF71n - Page 77

http://www.sapido.com.tw/ User Manual v1.0.0
77
 Router_B LAN PC will get IP address from Router_A.
If you failed the WDS setting, please check you setting with refer to the list below.
Note 1: LAN IP address should be under the same segment but cannot be the same number.
Router_A
Router_B
Wireless Mode
AP+WDS
WDS
LAN IP Address
Set the same segment as the
router B(Note 1)
Example :192.168.1.1
Set the same segment as the
router_A(Note 1)
Example :192.168.1.2
Security
Set the same security as
Router_B
Set the same security as
Router_A
DHCP
Enable
Disable
Router_A mac address
Select encryption for security