Item Description
Enable Dynamic Route Enable or Disable dynamic route
NAT Enable or Disable NAT function
Tran smit
There are 3 options：
1. Disable：do not send any RIP packet out
2. Send RIP1 packet out
3. Send RIP2 packet out
Receive
There are 3 options：
4. Disable：do not receive any RIP packet
5. Only receive RIP1 packet
6. Only receive RIP2 packet
Item Description
Enable Static Route Enable or Disable dynamic route
IP Address Destination IP address
Subnet Mask Destination IP subnet mask
Gateway Gateway IP address for destination
To Next Page
Loading...
