Step 8. The preinstall setting of "Sensor Alarm" is “Continuity Alarm”, means that the alarm will
touch off when the intensity reaches the level of indoor maximum limit. Sirens will continue
beeping until you turn off the alarm manually. If you want to change the setting to Define Alarm
Sounds, then you can adjust alarm sounding time under any abnormal movement, such as: 1
second, 2 seconds, 5 minutes ... etc.
Step 9. There are 5 types of different selectable beep length of "Siren”. When settle down alarm
sounds and siren, please press "Done" at the top right of the page to return to the sensing
feature page.
To Next Page
Loading...