30
Example:
Weighing: Tare the scale by placing a container on the weighing platform
e Switch on the Combics
The automatic self-test runs. Once a readout is shown, the Combics 3 is automatically
zeroed and ready to operate. With no load on the platform, you can zero the weighing
platform at any time by pressing (.
Place empty container on the platform
) Tare the scale
With the automatic tare function enabled, you do not need to press ) to tare the scale;
the tare weight is stored automatically when you place the container on the platform.
Wait until a zero value is displayed together with the NET symbol.
Place sample on the platform
Wait until the weight unit symbol is displayed (indicating stability)
and then read off the weight value
To Next Page
Loading...
Need help?
General
