Sartorius CW3P User Manual

You can assign codes (such as product
name, batch number, etc.) for identifi-
cation of measured values on printouts.
Features
– Assign up to four ID codes.
– Assign both a name and a value for
each ID code.
– The name is left-justified and the value
is right-justified on the printout. If the
entire code is too long for one line,
additional lines are printed.
– Enter ID code names in Setup under:
Device: Printout:
ID codes
Enter up to 20 characters for the ID
code name. No more than 11
characters are displayed during input;
all 20 characters are printed.
– Enter up to 21 characters for the value
of the ID code. Press the
ID soft key to
activate the input mode.
– Enter the first ID value directly through
the numeric keypad. Press the
1st
ID
soft key to save the value.
– To delete individual characters from an
ID value, press (; press the
Delete
soft key to delete the entire value.
– If both the name and value fields are
empty, no ID code is printed.
– In the Setup program, you can
configure when and whether ID codes
are printed (see “Configuring Print-
outs”).
35
Data ID Codes (Identifiers)
Factory settings for the ID code names:
ID1:
ID1
ID2: ID2
ID3: ID3
ID4: ID4
Factory settings for the ID code values:
No default values set.
Soft Key Functions
ID Toggle to ID code input
ESC Cancel input
Delete Delete selected ID code value
1st ID Save the value entered as
the first ID code

Sartorius CW3P Specifications

General

Brand	Sartorius
Model	CW3P
Category	Accessories
Language	English