2
General Information 4
Repairs 4
Models 4
Auxiliary Tools 4
Accompanying Literature 4
Operating the Balance 5
Key Functions 5
Password Levels 5
Setting the Language 5
SETUP Program 6
INFO Mode 6
INPUT Mode 7
MENU - Balance Operating Menu 8
Overview of the User / Service SETUP Program 9
Service Switches 10
Access Switch 10
Activating the BPI Mode / Deactivating the Write Protection 10
Activating the Service Mode 11
Calibration/Adjustment in the Service Mode 11
External Linearization 12
External Linearization with Manual Input of Weight Values 12
Manual Input of the Linearization Weights 12
Performing External Linearization 13
Internal Span Adjustment 14
External Span Adjustment 14
External Span Adjustment with Manual Input of Weight Values 14
External Span Adjustment with Stored Weight 15
Overwriting the Internal Calibration Weight 15
Calibration with a User-defined Weight 15
reproTEST 16
High Resolution - Display * 10 16
Operating the Balance 17
Key Functions 17
SETUP Program 17
Setting the Language 18
CONFIG Mode 18
APPLICATION Mode 18
INFO Mode 18
INPUT Mode 19
MENU - Balance Operating Menu 20
Activating the Service Mode 21
Calibration/Adjustment in the Service Mode 21
External Linearization 22
External Linearization with Manual Input of Weight Values 22
Manual Input of the Linearization Weights 22
Performing External Linearization 23
Internal Span Adjustment 24
External Span Adjustment 24
External Span Adjustment with Manual Input of Weight Values 24
External Span Adjustment with Stored Weight 25
Overwriting the Internal Calibration Weight 25
Calibration with a User-defined Weight 26
reproTEST 26
High Resolution - Display * 10 26
Servicing the Weighing Cell 27
Removing the Display and Control Unit from the Weighing Cell 27
Opening the Weighing Cell
(Small Single-Casting Block System, Brass System) 27
Opening the Weighing Cell (Large Single-Casting Block System) 27
Page
To Next Page
Loading...
Need help?
General