Sartorius PR 5210 Series - Page 57

PR 5210 Operating Manual Profibus Interface
Sartorius 57
6.3.1.3 Parameter 3: Scaling weight value for 20 mA output
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0 WEIGHT MSB
Byte 1 ""
Byte 2 ""
Byte 3 WEIGHT LSB
The weight value is stored at which the analog output is giving 20 mA.
Default = 3000
6.3.1.4 Parameter 4: Communication
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0
Byte 1
Byte 2
Byte 3 COM 2
1
COM 2
0
The transmission to a remote terminal (e.g. PR 1628) or the SMA protocol can be switched on or off.
COM = 0: switched off,
COM = 1: a remote terminal (e.g. PR 1628) switched on,
COM = 2: SMA protocol switched on,
default = 1.
6.3.1.5 Parameter 5: Digital outputs
Description Value
transparent*
aduerr
Limit1
Limit2
Limit3
tare active
0
1
2
3
4
5
* Transparent mode means, that the PLC is writing to the outputs directly.
Limit(x) means, that the transmitter is writing the limit result to the outputs directly.
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0
Byte 1 Output 1 , default = 0
Byte 2 Output 2 , default = 0
Byte 3 Output 3 , default = 0