Sartorius PR 5210 Series - Page 58

Profibus Interface PR 5210 Operating Manual
58 Sartorius
6.3.1.6 Parameter 6: RS485 interface
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0
Byte 1
Byte 2 Baudrate
Byte 3 Parity Stopbits Bits
Baudrate 0=300, 600, 1200, 2400, 4800, 9600, 6=19200 default = 9600
Bits 0 = 7 bit, 1 = 8 bit default = 0
Stopbits 0 = 1 Stopbit 1 = 2 Stopbits default = 0
Parity 0 = no, 1 = odd, 2 = even default = 2
Unvalid parameters are not taken. E.G. the SMA protocol has always 8 bit and no parity.
6.3.1.7 Parameter 7: Digital inputs
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Byte 0
Byte 1 Input 1 default 0
Byte 2 Input 2 default 0
Byte 3 Input 3 default 0
Description Value
none
set Zero
set Tare
reset Tare
0
1
2
3
The PLC can read the status of the inputs at any time.