To Next PageTo Next Page
Need help?Do you have a question about the Sartorius PR 5220 Series and is the answer not in the manual?
Basic operational guidelines for maintaining safe instrument use.
Specifies the authorized application of the instrument and pre-operation checks.
Outlines installation, component handling, and power connection requirements.
Details the available PR 5220 series transmitter versions based on type numbers.
Comprehensive summary of instrument features, specifications, and communication protocols.
Describes housing label, dimensions, and weight of the instrument.
Explains the instrument's display elements and control interface.
Details the various connection types and interfaces for the instrument.
Procedures for backing up data, handling power failures, and restoring factory settings.
Steps for connecting to the network, finding IP addresses, and using network tools.
Detailed procedures for calibrating the instrument using various methods like weight, mV/V, and load cell data.
Explains the J-Bus/ModBus protocol for PC/PLC communication.
Details commands and reply formats for the SMA protocol.
Describes the 8-byte read/write window and cyclic data exchange.
Explains the structure and usage of input/output areas for data transmission.
Procedures for restoring the instrument to its default factory configuration.
Instructions for updating the instrument's software using the FlashIt tool.
Lists error messages related to the weighing circuit and their possible causes.
Details weight error indicators and specific error messages for xBPI scales.
Lists common error messages encountered during instrument calibration.
Provides general characteristics, power supply, and ambient condition specifications.
Details load cell compatibility, principles, accuracy, and sensitivity.
Specifies housing dimensions, weight, and requirements for legal-for-trade use.
General| Brand | Sartorius |
|---|---|
| Model | PR 5220 Series |
| Category | Transmitter |
| Language | English |
