PR 5220 Instrument Manual Repairs and Maintenance
Sartorius EN-153
11 Repairs and Maintenance
Repairs are subject to inspection and must be carried out at Sartorius. In case of defect or malfunction, please
contact your local Sartorius dealer or service center for repair. When returning the instrument for repair,
please include a precise and complete description of the problem. Maintenance work may be carried out only
by a trained technician with expert knowledge of the hazards involved and the required precautions.
11.1 Solder Work
Soldering work on the instrument is neither required nor permitted.
11.2 Cleaning
!Disconnect the instrument from the supply voltage and remove connected data cables.
!Prevent moisture from penetrating the instrument.
!Do not use aggressive cleaning agents (solvents, etc.).
!
Do not wash down the equipment with water or dry it with compressed air; this is not permitted.
12 Disposal
The packaging is made from environmentally friendly materials, which are suitable for recycling. For more
information, please see the T&Cs.
If the packaging is no longer needed, it can be disposed of by local waste disposal authorities.
Contact your local authorities regarding the disposal of the devices.
In Germany, Sartorius also offers a return service and legally compliant recycling of
its equipment.
In other countries, please consult with the local authorities.
To Next Page
Loading...
Need help?
General
