Sartorius PR 5220 Series User Manual

PR 5220 Instrument Manual Commissioning
Sartorius EN-101
4.7.4 Network Parameters
You can configure settings for the network connections (built-in LAN adaptor).
Define the network parameters under
-[Network parameter].
Setup/Operating parameter
HW address
00:90:6C:6A:6B:5E
Fixed address determined by the instrument.
Hostname
PR 5220-
6A6B5E
The device name can be defined* by the user.
Use DHCP
The address is assigned by the server.
IP address
172.24.21.82
The address is assigned by the server.
Subnetmask
255.255.240.0
Mask for the permissible IP address range
Standardgateway
172.24.16.1
IP number for the gateway
Remote access
VNC-Client
255.255.255.255
Permitted client for instrument operation
[Hostname]
Caution!
The host name must be unique in the network!
* The device name [Hostname] is subject to the following restrictions:
- Minimum number of characters: 2, maximum number of characters: 24
- The first character must be a letter. Spaces are not permitted.
- 0-9, A-Z (upper and lower case letters are not distinguished) are permitted.
- - or . may be included, but neither at the end nor in succession.
[Use DHCP]
If the checkbox has been marked, the server defines the IP address automatically.
[VNC-Client]
You can configure access permissions for the address:
VNC-Client 0.0.0.0. Access over VNC not permitted
VNC-Client 172.24.21.101 Access only from client machine with this address
VNC-Client 172.24.21.255 Access from any client with address within range 172.24.21.1 - ..254
VNC-Client 255.255.255.255 Access from client with any address
Note:
When setting [IP address], [Subnet mask] and [Standard gateway], please consult with your network
administrator.

Sartorius PR 5220 Series Specifications

General

Brand	Sartorius
Model	PR 5220 Series
Category	Transmitter
Language	English