PR 5220 Instrument Manual Commissioning
Sartorius EN-59
4.4.4 Determining the Scale Interval
Weighingpoint/WP A/Calibration
Scale interval 3000 d
1kg
The scale interval 1, 2, 5 10, 20 or 50
can be set by pressing .
The weight unit is taken from [Max] and cannot be changed here.
The number of digits behind the decimal point must be determined already when entering [Max] as well.
After
or confirmation of the change is displayed with:
Set Scale interval
The maximum capacity is not an integer multiple of the scale interval.
To Next Page
Loading...
Need help?
General
