Any tampering with the QC equipment by anyone,
other than authorized by Sartorius service
technicians, will result in forfeiture of all claims under
the manufacturer’s warranty!
Fastening an Antitheft Locking Device
QC 7 Model:
To protect the scale from theft, attach it in a secure
location using the lug located at the back of the scale.
QC 34 and QC 64 Models:
Thread a commercially available bicycle lock through
one of the fins in the lower housing of the scale.
The QC scale along with an ING2 power supply
is suitable for use in the following hazardous area
within the European Community:
Zone 2, Group II, temperature class T4 according to
EN 60079-14
In countries other than Germany, the QC scale
may not be used in a Zone 2/Class I, Div. 2
hazardous area/location unless approval for use
in such hazardous areas has been granted by
the local authorities.
Pursuant to the German Directive for the
Implementation of Regulations for Prevention of
Accidents “Elektrische Anlagen und Betriebsmittel”
(VBG 4) (Electrical Installations and Equipment) of
April,1986, and in conjunction with Article 10
of the Low Voltage Directive 72/23/EEC issued on
February19,1973, by the European Community,
it is hereby certified that the equipment delivered,
the QC scale and accessories, has been
manufactured and tested in compliance with the
following DIN/VDE regulations:
DIN EN 60950
DIN EN 61010
1–9
To Next Page
Loading...
Need help?
General